Doors

The Wall Elements group includes six types of doors which can be inserted into a Wall.

pCon.planner_walls_08

1.Switch to the Room group, Insert tab and click on the arrow circled in red in the image on the left. The best projection to use for these insertions is Top.

2.Clicking on the arrow opens a menu offering Door as an option which can be selected with a click of the mouse.

pCon.planner_door_01

3.The Door selected must now be inserted into a Wall. To do this, move the mouse onto the desired Wall and click where you wish to insert the Door.
The image on the left shows a Double Glass Door in Top view which has just been inserted into a Wall.

There are many ways of editing doors. The following table lists the various properties of a Door and how they can be modified.

Properties of doors	Can be edited by means of
Height	Dimension figure on the object, Property Editor, interactors
Width	Dimension figure on the object, Property Editor, interactors
Position	Interactor
Lateral distance from neighboring objects	Dimension figure on the object
Vertical opening option	Interactor
Horizontal opening option (applies only to single doors)	Interactor
Open/Close	Interactor
Parapet	Dimension figure on the object, Property Editor
Top Thickness (only for glass doors)	Property Editor
Bottom Thickness (only for glass doors)	Property Editor
Side Thickness (only for glass doors)	Property Editor
Name	Property Editor

Whether dimensions and interactors are visible will always depend on the projection selected. The Height of a Door can, for example, not be set in the Top view by entering values or using an interactor.

The dimensions shown in blue (see following images) can be changed by clicking on them with the mouse and then entering the desired figure. You can also edit using the interactors. Just click on the relevant interactor and then make the correction by moving the mouse or entering the value on the keyboard.